Afikim Caddy Manuel d'utilisateur télécharger pdf (Page 17)

Caddy

2. UNPACKING AND ASSEMBLY

The Caddy can be delivered by your dealer fully pre-assembled, but it is

also possible that the product comes to you in parts in the box it was

packed in at the factory.

The Caddy was designed to be assembled and disassembled by the

user. Assembling the scooter is very easy and it is good to know the

procedure in case you want to disassemble the scooter for instance if

you want to take it with you in the back of a car.

2.1 Unpacking the box

The Caddy will normally be delivered to you in a large carton box,

please check if the box is not badly damaged. If this is the case you may

want to refuse the delivery. If there is damage to the box always report it

to the person delivering it and make sure the damage is noted on the

shipping documents you sign before accepting the delivery.

• Place the box on the floor the right way up (the top is marked

UP).

• Carefully cut the tape closing the box, make sure you don´t cut

the contents of the box.

• Open lid lid and remove all the parts from the box, mind your

back lifting some of the heavier parts out of the box.

• Put all parts on the floor and put the empty box away, you

should find the following parts (see figure 1):

•

a. The frame

b. The tiller

c. The rear basket

d. Two batteries

e. Two rear wheels

f. A battery charger

g. This manual

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 77 78

Pas de commentaire

Afikim Caddy Manuel d'utilisateur Page 17